| Customization: | Available |
|---|---|
| Type: | Stretch Blow Molding Machine |
| Raw Material: | PET |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 2cavity 2000BPH Blowing machine | ||
| Features | ||
| 1. Conveying preforms automatically with conveyor. | ||
| 2. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater. | ||
| 3. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure. |
||
| 4. No contamination and low noise with the air cylinder to drive the action instead of the oil pump. | ||
| 5. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine. | ||
| 6. Strong clamping force with high pressure and double crank links to lock the mold. | ||
| 7. Two ways of operating: Automatic and manual. | ||
| 8. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand. |
||
| 9. Contamination is avoided for the bottle body. | ||
| 10. Low rejection rate: Less than 0.2 percent. | ||
| Comparative Advantages | ||
| 1. Use screw of servo driver moving system. | ||
| 2. Automatic feeding heating and blowing. | ||
| 3. Patented preform feeding system for easy and safe. | ||
| 4. Heating system for each lamp adjustment and constant voltage control system. | ||
| 5. Touch screen human-machine interface for easy operation. | ||
| 6. Modular component design for easy maintainese | ||
| 7. Compact design for effective usage of floor space. | ||
| 8. Intelligent flow control with high pressure valve. | ||
| Parameter | ||
| Name | Specification | Data |
| Clamping system |
Number of cavity | 2pcs |
| Clamping unit | 4500kg | |
| Mold stroke | 60mm | |
| Stretch stroke | 180mm | |
| Bottom stroke | 30mm | |
| Cavity pitch | 76.2mm | |
| Heating pitch | 76.2mm | |
| Number of holder | 114pcs | |
| Container |
Max.container volume | 0.6L |
| Max. neck diameter | 38mm | |
| Max.prefrom height | 100mm | |
| Max.container diameter | 65mm | |
| Max.container height | 320mm | |
| Theoretical output | 2500BPH | |
| Electrical System | Heating oven | 8*7 |
| Box*channel | ||
| Number of lamp | 56 | |
| Heating power | 67.2 | |
| Installed power | 75 | |
| Voltage | 220v/380V/3 phase | |
| Air system | Operating pressure | 1.6kg/cm2 |
| Blowing pressure | 3.5Mpa | |
| High pressure air consuming | 5600L/MIN | |
| Power | 38KW | |
| Chiller system | Temperature | 10-15°C |
| Pressure | 0.4Mpa | |
| Flow rate | 80L/min | |
| Heating power | 8*7HP | |
| Machine | Machine dimension | 4.8*2.25*1.8m |
| Machine weight | 5500kg | |
| Components List | ||
| Components | Brand From | Manufacture from |
| PLC controller | SIEMENS,GERMAN | GERMAN |
| Touch screen | SIEMENS,GERMAN | CHINA |
| Cylinder | Airtac,TAIWAN | CHINA |
| Magnet valve | TPC, KOREA | CHINA |
| Photoelectric switch | OMRON, JAPAN | CHINA |
| Contactor | SCHNEIDER, FRANCE | CHINA |
| Sensor | OMRON, JAPAN | CHINA |
| Switch power | MEANWELL, TAIWAN | CHINA |
| Frequency converter | DELTA, TAIWAN | CHINA |
| Main Servo motor | MITSUBISHI 1.5KW,JAPAN | CHINA |
| Feeding Servo Motor | MITSUBISHI 0.75KW,JAPAN | CHINA |
| Clamping | DYDRULIC CLAMPING | CHINA |
| Seal | PIPE UNFIXED | CHIINA |
| +8615715848933 | |
| Tel | +8615250520457 |
| [email protected] |
){kind=link}