Carbonated soft drink bottle filling and packing machine
Features present are as under
1. Adopts the negative pressure filling which we specifically design for CSD filling, it ensures minimal loss of CO2 from the product
2. The configuration of filler is advanced, pithy and rational and the driving and up-down transmission is located between the stainless steel working plat and the bracket and their waterproof is good, sanitary and credible and adjusting and maintaining are very easy.
3. We design the filling valves on basis of foreign advanced technique for adapting high-speed hot filling. It can ensure the valves open and close flexibly because of using guide sheath. Adopting easy-fixed configuration, the valve is easy to cleaning promptly and has automatic cleaning function.
4. The filling operation is faster and more stable because the new type micro pressure filling system is adopted.
5. The electropneumatic filling valves are equipped with interchangeable level tubes to make the best precision filling, and the filling level for the bottle is adjust.
Main equipments as below:
1. Water treatment system (quartz sand filter, active carbon filter, softner, RO system and so on)
2. Ozone generator sterilizer
3. Aseptic water storage tank
4. Sugar melting tank & syrup filter
5. Flavour blending tank & syrup cooler
6. Co2 drink mixer & Co2 filter
7. Water chiller
8. Auto bottle washing, filling and capping line
9. Labeling machine
10. Date of manufacture printer
11. Final products film packaging machine and so on.
Product detailed
1. Rinser
Spring cramps are used in the bottle washing process. The empty bottles can be turned over 180° Along the conveying rail. There are two times of internal and external washing, the efficiency of bottle washing is high.Bottle clip equipped with efficient spray on nozzle. The extrusive droplet with 15° Angle ensures to wash all side of the bottle, and can save the water.
2. Filler
The design of filling structure is reasonable and hygiene dead angle, the run of equipment is stable, it can control the material from the bottleneck, the control accuracy is within ± 2mm (subject to bottle design). The filling valve material is SUS304. The filling system has liquid level automatic control. Filling valve lift is controlled by the valve elevator, after filling valve contact the bottleneck, it start to fill. Bottle is conveying by the wheel in the filling part.
3. Capper
Screw capping machine is most precision part in the 3-1 machine, it has a big influence to the goods stability and defective rate. Our screw capping has following feature.
Technical Parameter
| Model RFC-C series |
14-12-5 |
16-16-5 |
24-24-8 |
32-32-10 |
40-40-10 |
50-50-12 |
| Washing-Filling-Capping |
14-12-5 |
16-16-5 |
24-24-8 |
32-32-10 |
40-40-10 |
50-50-12 |
Producing capacity
(600ml) |
2000-4000
(bph) |
5000-7000
(bph) |
8000-12000
(bph) |
12000-15000
(bph) |
16000-20000
(bph) |
20000-24000
(bph) |
| Applicable bottle (mm) |
φ=50-108 H=170-340 330ml-2.25L |
| Pressure (kg/cm2) |
2~3 |
Outside vacuum
pump power (kw)
|
Main motor
1.5kw |
Main motor
2.2kw |
Main motor
3kw |
Main motor
4kw |
Main motor
7.5kw |
Main motor
9.5kw |
Overall dimension (mm)
(LxWxH) |
2100x1400
x2500 |
2460x1720
x2650 |
3100x2100
x2650 |
3500x2500
x2650 |
4600x1800
x2650 |
5200x4500
x3400 |
| Weight(kg) |
2500 |
3500 |
4200 |
5500 |
6800 |
7600 |
Configuration List:
| Item |
Parts Name |
Brand from |
| 1 |
PLC |
Germany |
| 2 |
Inverter |
| 3 |
Touch Screen |
| 4 |
Switch |
France |
| 5 |
Contactor |
| 6 |
Relayer |
| 7 |
Solenoid Valve |
Germany |
| 8 |
Drive motor |
Germany |
| 9 |
Reducer |
| 11 |
Main Bearing |
Japan |
| 12 |
Sensor |
Japan |
| 13 |
Air component |
Germany |
| 14 |
Stainless Steel Frame |
Korea |
Contact me
Mobile: +13862027738
){kind=link}