Washing Filling Capping Monoblock Carbonated Soft Drink Filling Machine

• Customization: Available
• Type: Volumetric Filling Machine
• Automatic Grade: Fully Automatic
• Model NO.: RFC-C24-24-8
• Filling Valve Head: Multi-Head
• Feed Cylinder Structure: Single-Room Feeding
• Dosing Device: Rotor
• Filling Principle: Pressure
• Packaging Container Lifting Structure: Pneumatic Lifting
• Structure: Rotary
• Packaging: Bottle
• Packaging Material: Plastic
• Filling Head: 24
• Package Type: Bottle
• Filling Size: 500ml
• Machine Material: 304 Stainless Steel
• Model: Rfc-C16-16-5
• Condition: New
• Filling Material: Carbonated Drink
• Transport Package: Plastic Film
• Specification: according to need
• Trademark: Labelong
• Origin: Jiangsu
• HS Code: 8422303090
• Production Capacity: 50 Units/Year

Product Description

Carbonated Drink Washing Filling Capping 3 in 1 Machine

Features present are as under
1. Adopts the negative pressure filling which we specifically design for CSD filling, it ensures minimal loss of CO2 from the product
2. The configuration of filler is advanced, pithy and rational and the driving and up-down transmission is located between the stainless steel working plat and the bracket and their waterproof is good, sanitary and credible and adjusting and maintaining are very easy.
3. We design the filling valves on basis of foreign advanced technique for adapting high-speed hot filling. It can ensure the valves open and close flexibly because of using guide sheath. Adopting easy-fixed configuration, the valve is easy to cleaning promptly and has automatic cleaning function.
4. The filling operation is faster and more stable because the new type micro pressure filling system is adopted.
5. The electropneumatic filling valves are equipped with interchangeable level tubes to make the best precision filling, and the filling level for the bottle is adjust.

Main equipments as below:
 
1. Water treatment system (quartz sand filter, active carbon filter, softner, RO system and so on)
2. Ozone generator sterilizer
3. Aseptic water storage tank
4. Sugar melting tank & syrup filter
5. Flavour blending tank & syrup cooler
6. Co2 drink mixer & Co2 filter
7. Water chiller
8. Auto bottle washing, filling and capping line
9. Labeling machine
10. Date of manufacture printer
11. Final products film packaging machine and so on.
 

Product detailed

1. Rinser

Spring cramps are used in the bottle washing process. The empty bottles can be turned over 180° Along the conveying rail. There are two times of internal and external washing, the efficiency of bottle washing is high.Bottle clip equipped with efficient spray on nozzle. The extrusive droplet with 15° Angle ensures to wash all side of the bottle, and can save the water.


2. Filler

The design of filling structure is reasonable and hygiene dead angle, the run of equipment is stable, it can control the material from the bottleneck, the control accuracy is within ± 2mm (subject to bottle design). The filling valve material is SUS304. The filling system has liquid level automatic control. Filling valve lift is controlled by the valve elevator, after filling valve contact the bottleneck, it start to fill. Bottle is conveying by the wheel in the filling part.

3. Capper

Screw capping machine is most precision part in the 3-1 machine, it has a big influence to the goods stability and defective rate. Our screw capping has following feature.



Mixer


 
Technical Parameter

Model RFC-C series	14-12-5	16-16-5	24-24-8	32-32-10	40-40-10	50-50-12
Washing-Filling-Capping	14-12-5	16-16-5	24-24-8	32-32-10	40-40-10	50-50-12
Producing capacity (600ml)	2000-4000 (bph)	5000-7000 (bph)	8000-12000 (bph)	12000-15000 (bph)	16000-20000 (bph)	20000-24000 (bph)
Applicable bottle (mm)					φ=50-108 H=170-340 330ml-2.25L
Pressure (kg/cm2)					2~3
Outside vacuum   pump power (kw)	Main motor 1.5kw	Main motor 2.2kw	Main motor 3kw	Main motor 4kw	Main motor 7.5kw	Main motor 9.5kw
Overall dimension (mm)   (LxWxH)	2100x1400 x2500	2460x1720 x2650	3100x2100 x2650	3500x2500 x2650	4600x1800 x2650	5200x4500 x3400
Weight(kg)	2500	3500	4200	5500	6800	7600

Configuration List:

Item	Parts Name	Brand from
1	PLC	Germany
2	Inverter
3	Touch Screen
4	Switch	France
5	Contactor
6	Relayer
7	Solenoid Valve	Germany
8	Drive motor	Germany
9	Reducer
11	Main Bearing	Japan
12	Sensor	Japan
13	Air component	Germany
14	Stainless Steel Frame	Korea

 

Contact me